How to Recycle Old Pine Wood Cabinets

If you have an old pine wood cabinet at homeHere are some simple steps on how to give your
and the color has faded, do you know that youold cabinet a new coating.
can actually recycle it instead of disposing it1. Remove all drawers from the wood cabinet and
away?lay them on the floor.
A pine wood cabinet is a tough cabinet which can2. Use a cement scraper to remove the old
last many years. The cabinet can withstand thecoating. Do this carefully and ensure that you do
test of time unless something breaks it apart.not damage the wood.
However, the color of the cabinet may not last3. Use a rag and rub some striper to remove any
but will fade with time.stubborn coating on the wood. Allow the wood to
When the color starts to fade, it will cause thedry up.
cabinet to look old, dull and dirty. By then, most4. Use sandpaper to sand the wood till it is
homeowners would choose to dispose it away assmooth.
it would be an awful sight if left in the house.5. Use a dry clean rag to dusk away all sanding
If you find that the cabinet is still in goodresidue on the wood until it is clean.
condition, you can recycle it easily by applying it6. Use a paint sprayer to spray a coat of new
with a new coat of paint. If you like the old color,paint on the wood and leave to dry. This may
you can get the same color and re-apply on it.take a day to dry up completely.
However if you like something different, you can7. Check the coating quality and color. If it is not
apply a little bit of creativity to make the cabinetto your requirement, apply another layer of
looks more modern, more classical or morecoating and leave to dry. This may take another
colorful.day.
To do this, all you need is to get some liquid8. If you want to create something different, use
based paints, sandpaper, portable vacuum, painta fine brush and different colors to create your
sprayer, furniture striper, brushes and rags todesign on the cabinet.
start the job. Remember to lay some9. Repeat the above step 2 to step 8 on the
newspapers on the floor before starting the jobdrawers that were taken out during step 1.
to prevent it from being dirties by the paints.